Researchers at the Centro de Investigaciones en Optca (CIO) in Mexico, appear to have come up with a better solution; a solution that could be quite a bit more affordable, yet even more reliable than current 3D scanning technology.
The process which is referred to as “Co-phased 360-degree profilometry” involves 5 things: A camera, 2 light projectors, the subject (positioned and able to be rotated 360 degrees), and a computer. It is based off a discovery outlined in a classical research paper by Takeda et al. in 1982, which results in 3D models of quasi-cylindrical solids, but fails to create reliable 3D models of non-cylindrical or more detailed objects. The Takeda et al. method uses a single light projector to shine parallel lines onto an object. A camera then captures images of the object with the bent light, and a computer is able to interpret those bends in order to create a 3D model of it. This just isn’t feasible though for those wishing to create 3D models of most objects, as many objects feature details that the Takeda et al. method would not be capable of modeling.
The new method, realized by researchers, Manuel Servin, Guillermo Garnica and J. M. Padilla, utilizes an additional projector which is positioned at an identical angle on both sides of the camera. Photos are taken with the camera, first with one projector beaming light toward the object, and then with the second doing the same thing from the other side. The object is then turned slightly and the same exact process takes place again. This takes place until enough photographs are taken to entirely model the object. It is based on many complicated equations that I can’t even begin to understand.
In the case of this 3D modeling experiment, we aren’t exactly tricking our brains, but we are providing the computers with sophisticated data about the way in which the light is being bent from both sides of the camera. Like our brains, with 3D glasses, the computer can comprehend the 3-dimensional characteristics of the object.
In the research paper, the team was able to successfully model a rather complex plastic skull, by using this method.
This could go a long way in helping create affordable methods of fabricating 3D printable models of tangible objects, rather than having to spend several thousand dollars on a 3D scanner that probably won’t provide quite as good results as this new method has the potential for. With the correct computer software, it would seem as though a machine capable of what these researchers have come up with could be built by the DIY community at quite an affordable price. It should be interesting to see how this evolves over the course of the next few years.
My question is, “How long until everyone will have access to technology like this, which allows them to create virtual objects of just about anything that exists in the tangible world?” This would lead to being able to view and print 3D models of virtually anything in ton the planet at the touch of a button.
Will this new method make 3D scanners obsolete anytime soon? Most definitely not, but it does provide yet another option for us to consider. What do you think of this new 3D modeling technique? Discuss in the Co-phased 360-degree profilometry forum thread on 3DPB.com.