Luckily for Egstad – and other bespectacled virtual reality fans – he has some experience with 3D printing, so he decided to design and print an adapter that would allow his Oculus Rift to sit more comfortably when he put it on. He detached the facial interface, which Oculus handily provides instructions for, though he found his own method worked best:
“In practice, what I’ve found works best is to hold the headset in both hands, face down with the top strap towards you, and apply firm upwards pressure with both your thumbs at the same time against the plastic rim of the facial interface until the tab starts to pop out,” he said in a comment.
Note: before you print the adapter, you should probably make sure you have a spare pair of glasses, as the design involves removing the original lenses from your glasses and slotting them into the 3D printed adapter. (Egstad suggests marking the lenses with a Sharpie or some other implement before removing them from the frames, so you know which way is up.) The adapter itself looks to be an easy, one-piece printing job, and when it’s finished, your lenses can be fit into a groove on the adapter’s inner rim. It should be a loose fit at first, says Egstad; it will tighten once the adapter is fitted onto the facial interface.
Once the adapter, with lenses in place, is fitted to the facial interface, the whole assembly can be reattached to your Rift by pushing in a couple of tabs. Boom – perfect virtual vision.
“This adapter is designed to take 42 mm diameter round lenses, such as the ones that come with Zenni optical frame #450021. The adapter spacing matches that frames spacing as close as I could get it,” says Egstad. “I have a medium-strong prescription and clearance between my prescription lenses and the rift lens is somewhere around 1.5 mm. I’m not sure if would be clearance issues with stronger prescriptions. This adapter is the result of a couple weeks of design and tweaking to get it working for my face, and it’s also my first fully realized 3d design and 3d printing project, so I make no guarantee this adapter will work for anyone but me!”
It’s worth a shot, though, and the design itself looks like it should be pretty easily adaptable if there are issues with fit or clearance. A simple solution for a potentially complex problem – as one commenter puts it, “You’re a (virtual) life saver!”
Is this something you might need? Discuss with us further over in the 3D Printed Oculus Rift Adapter forum at 3DPB.com.