The most efficient way to enhance these properties is to make the membranes patterned, or profiled, which is traditionally done with a painstaking technique that involves etching a silicon mold with the desired pattern, pouring in the polymer, and waiting until it hardens. Even then, the outcome of this time-consuming and cost-prohibitive process is a single pattern type, which still brings about limitations in the functioning of the membrane.
By utilizing 3D printing to help fabricate custom-synthesized ion exchange membranes, the research team is able to rapidly produce whichever pattern they need to enhance the hydrodynamic properties and improve the function of the membrane. According to Jiho Seo, a PhD candidate in materials science and engineering and the lead author of this recent study, this is the first known example of using 3D printing to help create patterned membrane structures.
“While surface patterned membranes have been studied previously, this is the first 3D printed example of these structures and the first model that really explains the resistance decrease in a quantitative way,” Seo said. “A simple parallel resistance model describes the effect of the pattern on lowering the resistance of these new membranes. This insight gives us a design tool to continue to innovate and create new patterns for further improvements along with changing the intrinsic chemistry of the material.”
The research findings were recently published in the American Chemical Society’s journal ACS Applied Materials and Interfaces, entitled “3D Printing of Micro-patterned Anion Exchange Membranes.” Supervised by Michael Hickner, Associate Professor of Materials Science and Engineering at Penn State, the research team will continue to investigate the different geometries and chemistries of the membranes they produce, and will also work on printing with new materials, both related to this membrane research and beyond. Aside from Seo and Hickner, PhD student Douglas Kushner also contributed to the published research. Discuss this project over in the 3D Printed Membranes forum at 3DPB.com.