A Finland-based designer named Samuli Kärkkäinen has created an application to help the visually impaired orient themselves via maps in any location. Touch Mapper is a simple tool that 3D prints tactile maps using map data from OpenStreetMap. Just enter the address that you want to map out, and Touch Mapper will instantly bring it up. You can drag and adjust the map if you need to, then click “create tactile map” and the site will show you the 3D model of the map. At that point, you can 3D print the map yourself or order a print from 3D printing service Playful Pixels. Normally, a map from the service costs €42; but they’re currently being sold at a discounted €35.
This certainly isn’t the first time we’ve seen 3D printing used to create maps for visually impaired people; just the other day we wrote about 3D printed Braille campus maps at Rutgers University. Touch Mapper’s maps are different in that they’re very visually oriented. The tactile maps are finely detailed and include representations of buildings, railways, roads, and waterways. Varied heights and textures differentiate the different topography; most bodies of water are represented by wavy surfaces, while smaller streams are just narrow lines. Pedestrian roads are raised higher than other roads, as the visually impaired utilize them more frequently. The user’s selected address is marked as a raised cone, and the map’s northeast corner is specially marked to ensure proper orientation.
A lot of people find maps to be obsolete thanks to GPS devices, and it’s true that visual maps have become less necessary than they used to be. However, even with a voice telling you exactly where and when to turn and how far to go, it’s still tremendously helpful to have a visual representation of where you are, and where natural features and buildings are in relation to your position. That’s something the visually impaired don’t have currently.
Touch Mapper is in beta right now, and Kärkkäinen welcomes questions and feedback via email at info@touch-mapper.org. Delivery of maps is expected to be pretty quick; the maps print in one to two days, and delivery within Europe should take less than a week (or only a day in Finland). International delivery might take a few weeks, but that’s nothing new. Try it out! What do you think of this new technology? Discuss in the 3D Printed Tactile Maps for Visually Impaired forum over at 3DPB.com.