We follow many stories about 3D printed prosthetics. In this case, however, biomedical engineering student Eliza Wrobel had quite the project ahead of her when she agreed to make an orthosis for a 33-year-old male who’d been in an accident and was suffering from tetraplegia, which usually means partial paralysis for the patient. With an orthosis, movement can be guided, assisted, or restricted as well as offer correction to a limb, depending on the patient’s needs.
Working under Bogdan Dybala, PhD. Eng. at the Faculty of Mechanical Engineering of Wroclaw University of Technology in Poland, Eliza’s mission was to help the patient by creating an orthosis that allowed him to do things like play his favorite sport—table tennis—as well as grab objects and hold onto light dumbbells. To allow for these specific requirements, Eliza had to employ reverse engineering. The process consisted of making a plastic cast and mold which was then 3D scanned at the university.
This device ended up using a stunning 70 3D printed parts in its construction. According to the ZMorph team, Eliza used their Voxelizer software to prepare them for 3D printing and then they were fabricated on the ZMorph 2.0 S hybrid 3D printer with single head extruder using 1.75mm ABS filament in a variety of colors. To connect the tinier levers and casings to each other, Eliza used numerous, small 3D printed pins. Because of the precision afforded by the ZMorph printer, she was able to use few parts that weren’t 3D printed.
A Velcro strap was used to attach the orthosis to the hand, and the patient is already using Eliza’s prototype for limited functionality in his hand, allowing him to do moderate activities. Indeed, Eliza may also use this prototype to eventually produce many more orthotics for those in need. You can also explore other ZMorph case studies right here. Discuss in the 3D Printed Orthosis forum over at 3DPB.com.