In the first 3 steps, shapespeare simply summarizes the process of scanning an object. Any camera can be used here, with one that takes high-quality high-resolution photos preferred. DSLR cameras are preferred because of their versatility and control. In Steps 4-8 he covers the various other cameras that can be used, such as GoPros, video cameras, and smart phones. (But again, a DSLR camera is the best one to use to make quality 3D printable models from scans.)
In Step 11, shapespeare covers how to set up your camera, and then we finally arrive at the important tips on how to take your actual photos in Step 12. (The better the photos, the better the scans.) He explains that you’ll need to move around the object to capture its 3D shape, and he recommends overlapping many of the photos:
“After you shoot the first picture look carefully at how it is framed. The object is to overlap adjacent exposures by 50-60%. When in doubt, overlap more. If you think you may have moved too much, go back halfway and shoot another picture. The order of the pictures doesn’t matter to most software. Remember that you can always dump extra shots, but you can’t make up for shots you didn’t take. Once you break down your set up you are done. If you find later that you need more shots you usually have to start again from the beginning.”
Once you are done shooting photos of your object, it’s time to pick the software you will use to change photos into scans. There are many choices here, but shapespeare does us the favor of narrowing things down to three recommended options. His top choice is Autodesk Memento, which is both easy to use and free. Other recommendations include Autodesk’s 123D Catch and Agisoft Photoscan, which is a step up in quality, harder to use, and requires a lot of RAM on your computer.
Once you have chosen your software, Step 16 has you processing your images, and Step 17 covers the qualities of a good scan (including mesh and color mapping). Shapespeare’s helpful tips allow you to photograph, process and 3D print almost anything! Including an oreo cookie…
Is this something you are interested in trying? Discuss in the 3D Prints from Photos forum over at 3DPB.com.