For five seconds, at least. It may not sound like much, but getting a spacecraft to hover at all is one of the most difficult things to accomplish in aerospace. According to NASA, the Dragon 2 “executed a picture-perfect propulsive hover test” at SpaceX’s rocket development facility in Texas on November 24. Eight of the SuperDraco thrusters were positioned around the perimeter of the spacecraft in pairs called “jet packs.” Fired simultaneously, the eight thrusters generated about 33,000 pounds of thrust, enough to raise the craft, hold it in the air for five seconds, and lower it gently back to the ground. The tests were actually conducted using a full-sized mockup of the Dragon capsule, tethered to a crane, so that engineers could adjust the landing software and systems on the spacecraft.
The Dragon has already made history as the first commercial spacecraft to deliver cargo to the International Space Station and return cargo safely to Earth back in 2012. Since then it has made several trips there and back again, including one flight that delivered a 3D printer to the ISS and another that brought home boxes of objects that had been printed by the space station’s astronauts using their new toy. Those trips have all been leading up to SpaceX’s ultimate goal, however, which is to take human passengers to the Space Station. The company was awarded a contract in 2014, along with Boeing, to do just that, though it will still be a while. SpaceX expects the Dragon 2’s first manned test flight to take place in 2-3 years.
The first test flight will not use propulsive landing; it will splash down into the ocean, slowed by parachutes, like other flights so far. Eventually, though, SpaceX hopes to perfect the technology that will allow their spacecraft to gracefully alight on the ground with no help from any devices but its own engine power. And if the Dragon can gracefully alight, unaided, on the Earth’s surface, what’s to stop it from doing the same on the surface of Mars? Watch the hovering Dragon below, both in real time and in super slow motion below. Discuss your thoughts on this latest test in the SpaceX Performs Hovering Test on Dragon and 3D Printed Super Thrusters forum over at 3DPB.com.