I never really thought about it before, but the tacky surface of an uncured print is similar to nail polish that just won’t dry. SLA printer manufacturer Formlabs noticed this, though, and it gave them an idea – why not hack a nail dryer to make a UV cure box? Instead of using the idea to build a new product to sell, the company helpfully created a video to teach you to build one yourself for under $30.
Required supplies include:
Tinfoil- Box cutter
- Scotch tape
- Box tape
- Pencil
- UV nail lamp
- Solar powered rotating mini display
- Cardboard box
- Most importantly – googly eyes
Most of those supplies can be found at your local hardware or office supply store, obviously, and you can buy a rotating mini display stand and a UV nail dryer inexpensively on Amazon. Make sure your box is large enough, because, according to Formlabs, thin parts could warp if they are too close to the UV bulbs.
Next, cover the entire inside of the box in tinfoil, making sure that the shinier side of the foil is facing inward. Tape it securely. Then, remove the turntable of the solar powered display stand and cover that in tinfoil before reattaching it. Place the rotating display inside the box – this is where your printed part will sit – and place the nail dryer over the opening you cut out of the box. Last, but not least, draw a monster face on the nail dryer and add googly eyes – important for keeping your curing print from trying to escape. When you’re ready to use your cure box, just place your part inside, turn on the nail dryer, and you’re in business. Let us know if you take on this project in the $30 DIY Cure Box forum on 3DPB.com. For a more thorough, visual instruction, take a look at the video below: