The first human powered international submarine race was held in 1989 in Florida and had 17 crafts competing. For this competition each team develops a one or two person, “wet” submarine that they have designed from scratch, which relies upon novel techniques for propulsion and guidance. The race consists of passage through a 10 m section of an indoor channel that the U.S. Navy uses to test their new ship designs. The competition lasts for five days and each team may run their submarine through the course for as many runs as time allows.
“I think Jeremy and I had about 14 emails the first week so it wasn’t as simple as a file conversion. It usually never is. He sent me an STL file that I read into Geomagic® Studio Software in an attempt to create a nurbs surface. We were dealing with low-resolution files and an edge on the blade that was giving the surface creation fits! Jeremy did four or five rewrites before we had a file we could use.”
The collaboration didn’t end there, however. Once Kerkstra was able to provide a usable file he inquired about the possibilities of also doing the 3D printing. This required a great deal more conversation between Burton Precision and the human powered submarine team. Kerkstra explained the nature of their collaboration:
“We had further discussions about strength of material, testing using the scale version, and overall functionality of the printed part. The first surface files that we provided failed the initial testing in their simulator because the blade thickness was too thin. That was enlarged and the thicker blade passed. We 3D printed the propeller on a 3D Systems ProJet 3500 HDMax printer in a plastic material called Crystal.”
“Burton Precision became a key player in providing a hands-on learning experience for me and all the team members involved in the scale model propeller test. This kind of out of the classroom training is at the core of our team’s mission statement, and everyone from outside U of M who contribute to that deserves special recognition.”
In case you were wondering, back in April the 3D printed propeller was tested for the very first time,and it worked nearly perfectly. The possibilities of utilizing 3D printing to make custom props for boats, planes and submarines could give designers an entirely new tool for their creations. Let’s hear your thoughts on this story in the 3D printed submarine propeller forum thread on 3DPB.com.