eos

Sponsored

3D Printing in Healthcare: The Future is Here

Additive manufacturing (AM) is revolutionizing a variety of industries, and healthcare is ripe for transformation. According to SME, the 3D printed medical devices market is expected to near $26 billion…

The State of 3D Printing in Industrial Goods, Part Four

In the previous installment in our series on the use of 3D printing in the industrial goods sector, we discussed some general trends, as well as the key manufacturers of…

3D Printing Stalwarts: EOS

EOS was an early pioneer in laser powder bed fusion (PBF) technology and currently stands as a leader in the space, though there are an increasing number of entrants. The…

3D Printing News Briefs: November 25, 2019

We’re finishing the week out with some more formnext news for 3D Printing News Briefs: Poly-Shape presented a metal 3D printed Francis Turbine at the event. Moving on, Etihad Engineering…

3D Printing News Briefs: November 20, 2019

We’re starting out with some formnext news in today’s 3D Printing News Briefs, as the show is currently taking place in Frankfurt this week. SCANLAB is introducing a new scan…

3D Printing News Briefs: November 15, 2019

In today’s 3D Printing News Briefs, we’re sharing stories about new partnerships, a new material, and a new system for safe powder handling. EOS and AMFG have announced a partnership,…

Etteplan & EOS Collaborate to Make 3D Printed Metal Objects with Embedded Electronics

Finland-based company Etteplan offers solutions for industrial equipment and plant engineering, as well as software and embedded solutions, to manufacturing companies around the world. In addition to additive manufacturing, some…

3D Printing News Briefs: October 6, 2019

We’ve got lots of material news for you in today’s 3D Printing News Briefs, starting with a Material Development Kit from RPS. Polymaker and Covestro are releasing three new materials…

Futuristic 3D Printing with HelixJet Plasma Manufacturing Process

While 3D printing takes many different forms these days, researchers from the UK and Germany are exploring a new angle with the HelixJet, a capacitively coupled radio frequency plasma with…

Launcher’s Adventure Building Commercial Rockets Using 3D Printed Engines

Spending on space exploration is booming. We have seen many ambitious private endeavors come onto the scene in the last few years, from building and launching satellites into Low Earth…

Aidro Hydraulics & EOS Highlighting AM Processes for the Oil & Gas Industry

In a recent collaboration involving the realm of oil and gas, Italy’s Aidro Hydraulics & 3D Printing and EOS are working to raise awareness regarding the benefits of additive manufacturing….

3D Printing News Briefs: June 18, 2019

We’re starting with business in today’s 3D Printing News Briefs: Canadian additive and space manufacturing companies are partnering up for a two-year project, while Thor3D and Polyga have announced a…

Variability of Additive Manufacturing Processes Part 4

This is a part of a series; Part one is here, two here, and three here. The results for small, positive features are shown in Figure 11 and Table 4….

Variability of Additive Manufacturing Processes Part One

While additive manufacturing (AM) has historically been used for rapid prototyping, the field has greatly advanced, drawing AM into manufacturing and production of end-use products. For use as a manufacturing…

3D Printing & Additive Manufacturing Milestones: EOS Celebrates Three Decades

Germany’s EOS has been revolutionizing and expanding the world of manufacturing for 30 years now. As one of the leaders in 3D printing and additive manufacturing, their innovative impact in…

Evonik Celebrates 40 Years of PEBA, Adapts It For 3D Printing

Specialist-chemicals company Evonik is celebrating the 40th anniversary of its signature polymer, PEBA, with the release of it for use in 3D printing. When we last reported on Evonik in…

Launcher & AMCM Develop Largest Known 3D Printed DMLS Rocket Engine Part

Launcher and AMCM have just announced successful production of a large single-part 3D printed rocket, now available for direct purchase from aerospace companies. The E-2 liquid rocket engine chamber was…

EOS Buys 3D Printing Startup Vulcan Labs: Analysis and Comment

German firm EOS has acquired Vulcan labs and will integrate the startup into its Pflugerville operations to work on the Integra P 400. This brings aboard a very experienced team of people…

3D Printing News Briefs: January 19, 2019

Welcome to the first edition of 3D Printing News Briefs in 2019! We took a brief hiatus at the beginning of the new year, and now we’re back, bringing you…

3DPrint.com The Year in Review: 3D Printing 2018

2018 was a very exciting year in 3D Printing. If we look at the big trends we can see the rise of startups with tens of millions in investment, market…

EOS and Etihad Airways Engineering Partner to Expand 3D Printed Aviation Applications

The United Arab Emirates’ Etihad Airways has long been serious about incorporating 3D printing into its airplanes, particularly cabin components. Now Etihad Airways Engineering, the largest aircraft maintenance, repair and overhaul…

3D Printing News Briefs: October 16, 2018

We’re starting with some business news in today’s 3D Printing News Briefs, including stories about a new 3D printer, an anniversary, and a 3D printing investment. Cincinnati Incorporated has launched…

Interview with Fabian Alefeld of Additive Minds, 3D Printing Training, Consulting and Application Development

One of the things holding 3D printing back is the lack of Application Development Consultants. Imagine the dawn of the asphalt age, bitumen production increases as maps are filled with…

Interview with Kai Witter Looking at the Business Case for DyeMansion Depowdering and Dyeing Powder Bed Fusion Parts

From file to software to machine to finished part takes a design along a path through many different vendors, formats, processes, and interactions. We as an industry are trying to…