point-of-care

In modern medicine, 3D printing technology has opened new frontiers in medical device development, offering unprecedented customization and rapid prototyping capabilities. At the forefront of this revolutionary wave is Mayo…

Ricoh (TYO: 7752) announced a partnership with Materialise (Nasdaq: MTLS) at the Radiological Society of North America (RSNA) 2023 event. This collaboration aims to make 3D printing more accessible and…

In this week’s roundup of 3D printing webinars and events, Stratasys continues its North American tour, and 3D Systems starts its Additive Insights Roadshow. There’s an Automation Expo in Mumbai,…

It’s a busy week of webinars and events in the 3D printing industry! The Paris Air Show is back, and Stratasys continues its U.S. tour, and starts Stratafest as well….

Austria´s Salzburg University Hospital has 3D printed a polyether ether ketone (PEEK) cranial implant in-house and implanted it into a 55-year-old man suffering from a skull deformity. Although PEEK has…

We’re ramping up again in this week’s roundup, with several events taking place, including ICAM 2022, DEVELOP3D Live, ASME’s AM Medical Summit, and more. In terms of webinars, Stratasys and…

According to Savi Baveja, HP’s Chief Strategy & Incubation Officer, technologies such as 3D printing and microfluidics are beginning to “realize the better outcomes that have long been promised of…

A collaborative team of researchers from University College London, Universidade de Santiago de Compostela (USC), and FabRx, an expert in pharma-tech, tackled the issue of fabricating personalized medication not just…

The U.S. Food and Drug Administration’s (FDA’s) Center for Devices and Radiological Health (CDRH) has published a discussion paper on the topic of 3D printing medical devices at the point…

At last month’s International Conference on Additive Manufacturing (ICAM) 2021 in Anaheim, California, hosted by ASTM International’s Additive Manufacturing Center of Excellence (AMCOE), a wide variety of topics were covered,…

We’re starting with an unusual story in today’s 3D Printing News Briefs, as mimiX Biotherapeutics, which launched its first acoustic bioprinter this week, noticed that Facebook’s new Meta logo looked…

At the start of SME’s 30th year of RAPID + TCT, widely known as North America’s largest, most important additive manufacturing event, AM consultant and writer Todd Grimm got things…

In today’s 3D Printing News Briefs, some new 3D printed industry technology is being tested at Curtin Malaysia, and three partners are working to make vehicles more lightweight. Researchers have…

After the successful implementation of additive manufacturing (AM) in aerospace, medical 3D printing has been leading the charge for adoption for a number of applications. Among the most accessible is…

We’ve got another busy week of industry webinars and events, both virtual and in-person, to tell you about! Topics range from automotive 3D printing and 3D printing steel to point-of-care…

Synopsys, with its worldwide headquarters located in California and a score of other locations all across the globe, is focused on smart technology, and with more than 30 years in…

We’ve got another full week of AM industry webinars and events to tell you about, so let’s not waste any time on the introductions—jump right in! SPE’s ANTEC 2021, with…

In 2019, global orthopedics manufacturing company LimaCorporate S.p.A. and the Hospital for Special Surgery (HSS), the top-ranked orthopedic hospital in the United States, announced that they were partnering to establish the…

Additive Manufacturing Strategies 2021, co-hosted by 3DPrint.com and SmarTech Analysis, held its fourth summit in a virtual format. Each day focused on two verticals, with the focus first on metal…

During most of 2020, the entire world has been submerged in a health crisis due to the ongoing COVID-19 pandemic. This unprecedented situation could be a turning point in history,…

It’s no secret that 3D printing has done a lot to help during the ongoing COVID-19 pandemic, even while it’s causing havoc in our own industry, as well. 3D Systems…

I hope you’ve cleared your schedule for the week, because we’ve got a lot of webinars and virtual events to tell you about! Formlabs and ASME are both hosting summits,…

With experience manufacturing over one million medical devices, planning 120,000 patient-specific cases, and supporting more than 85 CE-marked and FDA-cleared medical devices, 3D Systems’ healthcare business is focusing on accelerating…

We’ve got virtual events and webinars this week covering everything from sustainability and forming to metal and medical additive manufacturing. Read on to learn what’s available! NatureWorks 3D Considers Sustainability…