electric vehicles
3D Printing Miracles: Electric Car Apocalypse
We’re accustomed to introspection regarding the future of 3D printing, pondering improvements to enhance the viability of our technology. Yet, what circumstances could enable us to expand from $14.7 billion…
Half of Hyundai’s Singapore Innovation Center Is Run by Robots
Hyundai (KRX: 005380) has just inaugurated the Hyundai Motor Group Innovation Center Singapore (HMGICS), a groundbreaking facility set to transform the landscape of electric vehicle (EV) production. Equipped with AI,…
3D Printing News Briefs, October 14, 2023: Smart Gloves, Architectural Ceramics, & More
We’re starting off 3D Printing News Briefs with research about vat photopolymerization for high viscosity resin, and then 3D printed smart mesh gloves. Robotics and 3D printing in architectural ceramics…
Tesla’s 3D Printed Sand Molds: The Key to Cheaper EVs
Tesla (Nasdaq: TSLA) is trying to master the art of casting large, complex car parts in one go. If it succeeds, it will change how cars are made, making it…
Additive Industries Expands European Footprint with MetalFAB G2 Installation in Italy
Demonstrating a significant step in its European expansion, Additive Industries announced the installation of its MetalFABG2 3D metal printer at ADDDAM’s facility in Brixen. This partnership marks ADDDAM – a…
3D Printing News Briefs, July 13, 2023: Tungsten Powder, Car Interior Design, & More
In today’s 3D Printing News Briefs, we’ll tell you about the awards a 3D printing company won, a partnership for tungsten powder, 3D printed interior car design, and 3D printed…
Stellantis Ventures Invests €100M in 6K, Lyten, and 9 Other Firms for Sustainable Mobility
Last year, multinational automotive powerhouse Stellantis launched its venture capital arm, Stellantis Ventures, to further its green mobility goals. Furnished with an initial fund of €300 million, Stellantis Ventures targets…
Canada’s Auto Parts Suppliers to Debut EV with 3D Printed Chassis
At Consumer Electronics Show (CES) 2023 in Las Vegas (January 5-8), the Automotive Parts Manufacturers’ Association (APMA), a Canadian trade organization, will officially debut Project Arrow: an electric vehicle (EV)…
3D Printing Webinar and Event Roundup: December 11, 2022
We have another busy week of webinars and events for you, starting with ASTM International’s AM Safety Certificate Course. Velo3D continues its roadshow, and HP is holding a virtual tour,…
3D Printing Webinar and Event Roundup: October 30, 2022
We’re ramping up again in this week’s roundup, with several events taking place, including ICAM 2022, DEVELOP3D Live, ASME’s AM Medical Summit, and more. In terms of webinars, Stratasys and…
White House Awards $2.8B to 3D Printing & Advanced Manufacturing EV Battery Projects
In the Biden administration’s latest show of support for additive manufacturing (AM) and advanced manufacturing, the Department of Energy (DOE) announced the first round of grants for domestic manufacturing of…
GE Trades 3D Printed Generator Tech for Stake in EV Startup Hyliion
General Electric (GE) announced that the company has sold generator technology developed by the company’s additive manufacturing (AM) division, GE Additive, to electric vehicle (EV) startup, Hyliion Holdings Corporation. The…
Innovation for Electric Vehicles Polymer 3D Printing – An HP and 3DPrint.com Webinar
As additive manufacturing (AM) has matured, the technology is now primed for widespread adoption in the automotive sector. Already multiple vehicle manufacturers, including Volkswagen and Ford, have announced plans to…
3D Printing Webinar and Event Roundup: April 24, 2022
The last few weeks have been a little slow in terms of 3D printing webinars and events, but this week is more than making up for it! Topics run the…
3D Printed Car Company Local Motors Shuts Down
Multiple automotive and tech news sites have reported that Local Motors (LM), the manufacturer of the Olli 3D printed shuttle, has ceased operations. The main source of information comes from…
3D Printing Webinar and Event Roundup: November 28, 2021
AM industry events and webinars are back with a vengeance this week as we move into the busy holiday season and this week’s roundup. Topics include everything from standards in…
Rapid + TCT 2021: CEO Reichental on New Nexa3D Products and the 3D Printing Industry
During the recent RAPID + TCT 2021 event, ultrafast polymer 3D printer maker Nexa3D showcased its end-to-end 3D printing validated workflow for the first time. From September 13 through 15,…
3D Printing Webinar and Event Roundup: September 26, 2021
We’ve got plenty of in-person and virtual events to tell you about this week, starting with TCT3Sixty and three other shows you can attend with the same pass! We’ve got…
Hyundai to Drive Electric Vehicle Manufacturing with 3D Printing
As nations attempt to address climate change concerns with increased production of electric vehicles (EVs), manufacturers are exploring opportunities to advance their operations overall by deploying new fabrication technologies. This…
3D Printed Olli Shuttle to Be Powered by Perrone Robotics
We’ve got exciting news to share in the world of autonomous vehicles (AV), as Local Motors, Inc., a ground mobility company that designs, manufactures, and deploys next-generation vehicles, such as the…
Goodyear to Test First Airless 3D Printed Tire on Autonomous Vehicle in Florida
As part of a project to support urban autonomous vehicle transportation, the city of Jacksonville, Florida will test the autonomous Olli shuttle fitted with Goodyear’s innovative 3D printed airless tires….
3D Printing News Briefs, July 22, 2021: XJet, TPM & Duncan Parnell, Seurat, FedDev Ontario & University of Waterloo, Tata Technologies & Stratasys, US Marine Corps, Nexa3D, INTAMSYS, Shell, ORNL & Local Motors
We’re sharing plenty of business news with you today in this edition of 3D Printing News Briefs, starting with two new executive appointments at XJet and TPM’s acquisition of Duncan…
3D Printing, A Pedalution – Part Eight: The E-Bike Apocalypse
All in all, we’ve learned which 3D printed parts are being used by bike companies and how people are using 3D printing. We’ve learned how the technology may be able…
How Will 3D Printing Fit into Biden’s $1.8T Infrastructure Plan
At the start of his presidency, Joe Biden presented the Build Back Better plan, calling on over $2 trillion spending to revitalize U.S. infrastructure over the next eight years. Aspects…
