3DPrint.com | The Voice of 3D Printing / Additive Manufacturing

AMS 2025

News

3D Printing Financials: Dissecting Nikon and SLM’s Earnings Post-Acquisition

Nikon’s (TYO: 7731) acquisition of SLM Solutions in 2023 marked a significant change for both. With this move, SLM Solutions, originally a German company listed locally in the Electronic Trading…

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The…


Something Federal in the Air at AMUG 2024

“The 3D printing industry would probably be dead in the water if it weren’t for the U.S. government,” a representative of the US military said at the 2024 Additive Manufacturing…

Big Changes at BICO: Founders Leave as Whistleblower Revelations Spark Overhaul

In a significant development at BICO (STO: BICO), founders Erik Gatenholm and Hector Martinez have decided to leave the company after eight years, marking the end of an era for…

Sponsored

UnionTech Showcases Innovative RSPro1400 3D Printer at AMUG 2024 with RP America

RP America, a UnionTech reseller, was eager to present the UnionTech RSPro1400 at the AMUG conference from March 10-14 in Chicago, Illinois. This event shined a spotlight on the RSPro1400,…

Liquid Metal 3D Printing Sector Emerges with Fluent Metal’s $5.5M Investment

Since Xerox first bought Vader Systems and its liquid metal 3D printing division in 2019, the additive manufacturing (AM) sector has been awaiting the emergence of a niche dedicated to…

3DPOD Episode 191: Amy Alexander, 3D Printing at the Mayo Clinic

Amy Alexander leads the 3D printing initiatives at the Mayo Clinic. You’ll be astounded by the ambitious plans this hospital has for additive manufacturing. In this episode of the 3DPOD,…

Nexa3D Welcomes 3D-Fuel Materials to Its Expanding Family

California-based Nexa3D is quickly expanding its product offerings, acquiring assets that both grow its overall additive manufacturing (AM) processes and materials. Complementing its November 2023 purchase of material extrusion firm…

3D Printing Webinar and Event Roundup: March 17, 2024

It’s another busy week of webinars and events, including SALMED 2024 and AM Forum in Berlin. Stratasys continues its in-person training and is offering two webinars, ASTM is holding a…

3D Printing News Briefs, March 16, 2024: Partnerships, Affordable Bioprinter, & More

We’re starting with dental 3D printing news today, and then moving on to some new partnerships. Then it’s on to some interesting university research about 3D printing plant-based pharmaceuticals, but…

3D Printed Micro Antenna is 15% Smaller and 6X Lighter

Horizon Microtechnologies has achieved success in creating a high-frequency D-Band horn antenna through micro 3D printing. However, this achievement did not rely solely on 3D printing; it involved a combination…

3DPOD Episode 190: Generative Design for 3D Printing with Novineer CEO Ali Tamijani

Ali Tamijani, a professor in the Department of Aerospace Engineering at Embry-Riddle Aeronautical University, has an extensive background in composites, tool pathing, and the development of functional 3D printed parts,…

The Colossus of Constantine Reborn in Italy with the Help of 3D Printing

It’s amazing how quickly art can get lost to history. From pillaging to simple misplacements, there are countless examples of classic works vanishing in an instant. However, today, that doesn’t…

Layer by Layer: 10 3D Printing Architectural Feats of Originality

In a world where innovation meets necessity, 3D printing in architecture stands out as a fresh frontier of impressive creations. These ten projects show the potential of 3D printing to…

3D Printing Financials: voxeljet’s Financial Reshuffle

In a series of significant announcements made on March 13, 2024, voxeljet (Nasdaq: VJET) has revealed a plan to reshape its financial structure and strategic direction. As part of these…

Featured

Exclusive Interview: BICO’s New Bioprinting Era under Maria Forss Begins

In the dynamic landscape of life sciences, Maria Forss has taken the helm as the new CEO of BICO (STO: BICO), a name that emerged from bioprinting pioneer Cellink and…

Ricoh to Open 3D Printing Center of Excellence at North Carolina State University

Japanese 2D-to-3D printing firm Ricoh is further extending its activities in the additive manufacturing (AM) sector, this time partnering with North Carolina State University to establish a Center of Excellence….

Featured PRO

What the Pentagon’s Interest in Ursa Major Says about 3D Printing as an Industry

In the last couple of weeks, mainstream media attention has put a spotlight on Ursa Major Technologies, a Denver-based company dedicated exclusively to developing and producing rocket motors built with…

Featured PRO

Evolution and Strategy: M&A Insights in the 3D Printing Industry, 2022-2023

As 2024 unfolds, the 3D printing industry remains busy with mergers and acquisitions (M&As), showing it continues on a path of innovation and market expansion. While much of 2023 was…

PRO

Where Have All AM’s Unicorns Gone?

In the rapidly evolving world of 3D printing, startups valued at over a billion dollars, known as unicorns, once seemed as fantastical as the mythical creatures themselves. While a few…


Research

Market Studies (131) View All


Data Reports (44) View All




Jobs

Additive Manufacturing jobs worldwide.

View Jobs