It was just last week that we reported on a company called Carbon3D, who had just unveiled a “breakthrough” 3D printing process referred to as Continuous Liquid Interface Production technology (CLIP). Quickly news of this new 3D printing process, which claims to be able to print objects 25-100 times faster than traditional 3D printers, hit the mainstream media. The technology proves that perhaps widespread use of 3D printing could be a lot closer than we think. If objects can be printed in minutes rather than in hours, doesn’t the technology become a lot more attractive for just about everyone? It will really depend on the price of the printers, which the company has not given any clues to as of yet.
Now, less than a week later, 3DPrint.com has been informed by a company called Gizmo 3D, that they too are working on a super fast SLA style 3D printer, which may actually one-up the Carbon3D system, as far as speed and print quality go.
While the Gizmo 3D printer uses Direct Light Processing (DLP) technology in order to create solid objects out of liquid resin, their method is not the same as that used in other DLP 3D printers on the market today, nor is it the same as the method that Carbon3D has unveiled, although similar.
“[Our] printer is a top-down DLP printer,” Kobus du Toit, Founder of Gizmo 3D Printers tells 3DPrint.com. “It is great for printing big parts because there is no suction problems. SLA printers like the Form 1 use a laser and it draws lines like an FDM machine. It is fine for printing small items, but not so great when you want to print a lot of items on the build plate. The B9 Creator and Titan DLP printers are bottom-up DLP printers. All bottom-up printers have the same issues. They all have suction problems, so the guys [at Carbon3D] are trying to solve problems with nature [by] coming up with elaborate ways like an oxygen layer between the projection area and the resin. We have alot of oxygen around us, let it do its work for free!”
What makes du Toit’s methodology so incredible and so fast, is that instead of printing in broken layers, with quick flashes of a projected image from the DLP projector, his layers are printed like an animation, without any breaks between frames. The build plate, full of resin, continuously moves downward while this animation plays. Currently he calls this method of printing “continuous printing” but says that “animated printing” might even be a better term.
This continuous printing method is similar to what Carbon3D does with their printers, but instead of using a bottom up methodology, du Toit uses a top down system, where objects are printed within a vat of liquid, and remain there for the duration of the print. As seen in the amazing video at the top of this page, du Toit’s 3D printer is capable of printing extraordinarily fast. In fact he says that it is capable of printing an object 150mm x 80mm x 26mm in size, at a 50 micron z-axis resolution, in just 6 minutes. According to du Toit, there is another benefit to his 3D printer which is not known to exist with Carbon3D’s machine.
“I believe the continues printing method that Carbon 3D is using, and what I am using, can really only be used on thin walls,” he tells us. “As the thin wall dips into the resin, the top is small enough that the resin flows over the wall quickly enough. I will upgrade my software so that the user can use the ‘Override Manager’ to go seemlessly between standard printing and continuous printing. Think of a box. You might print the front against the build plate. That would be your big flat surface. For that you would use standard printing with a wiper. When you get to the 1mm of 2mm thick walls you will tell the ‘Override Manager’ to use continuous printing and it will just fly through the print.”
So what is the method to du Toit’s madness, and what is it that allows him to print objects so ridiculously fast? Well, currently he is working on lauching a Kickstarter campaign for this technology, while he also needs to work on patenting his innovations, so much of it still remains a secret. He did, however, reveal some details to us.
“I am using the same DLP technology as everybody else building bottom-up printers, except mine is a top-down,” he tells us. “I just have special features that set it apart. [There is] one top secret that needs to be patented and I will probably not talk about it until I [launch on] Kickstarter. There are alot of smart and rich people out there that might be able to build it into their machines before I [go on] Kickstarter.”
That secret, which du Toit says he is dying to tell us about, makes his printing process twice as fast as the process would be without it. He plans to launch several 3D printers via his Kickstarter campaign, both including the “secret” technology and excluding it. The most basic Gizmo 3D printer will be the GiziMate and it will be priced at $2,500. The biggest printer will be the GiziMax which will measure an astounding 2m tall and be priced in or around the $6,000 range. In addition, to add on the “secret”, which allows for twice the printing speeds, it will cost about $2,500.
In all, there will be 3 different models of printers offered via the Kickstarter campaign, which is scheduled to launch sometime this coming September, if all goes as planned. Those models can be seen below along with their maximum print sizes.
- GiziMate – 400mm L x 200mm W x 200mm H
- GiziPro – 400mm L x 200mm W x 350mm H
- GiziMax – 400mm L x 200mm W x 850mm H
One of the great benefits of these machines, just like that of other DLP based 3D printers, is the fact that the printing process doesn’t slow down when new objects are added to the build plate. This is because the projector has the ability to display multiple animations at once. Another benefit of the Gizmo 3D printers is that they have the ability to print multiple objects all in different colors by using a ‘multi color vat’. Because of the top down method of printing, this can easily be added on.
Other interesting components and features of the printers are as follows:
- Precision linear slider rails – This allows for precision movement and low friction.
- Heated vat – The resin is heated to 22 degrees C to make it flow better and provide for a higher resolution.
- Leveling – The feet on the printers are adjustable allowing the user to level the machine so that it can print on any surface.
- Aluminum frame – Made using 40mm x 40mm aluminum. Also includes laser cut parts made from 2mm to 3mm steel. Most parts are then powder coated.
- Gizmetor – This is the software used on the Gizmo 3D printers. It will be feature rich, and include a hotspot manager that prevents prints from getting damaged by high energy hotspots.
du Toit plans to have 4 beta units of his machines made by next week. It will then take him a month to get all the parts together from suppliers. He will then begin assembling and testing the machines before moving on with production.
“One of the 4 machines will go to an engineering company in NZ, one will go to an artist in Sydney, Australia and 2 will go to the US for reviews,” he explains. “I don’t want to do what the other companies are doing and release an unfinished product because I know how it feels. When my beta testers are happy I can release.”
If all goes as planned, like mentioned above, you should be able to pre-order your very own Gizmo 3D printer starting at just $2,500 this coming September. We are told that in the worst case scenario, the Kickstarter launch could be pushed out until November, depending on how beta testing goes and the speed in which du Toit is able to get his imported parts.
What do you think about this incredible new 3D printer which perhaps could revolutionize the 3D printing space? Discuss in the Gizmo 3D Printers forum thread on 3DPB.com.
You May Also Like
College Freshman Creates COVID-Inspired Chess Set with 3D Printing
Relying on ingenuity and 3D printing technology, 18-year old William Paterson University freshman Nicholas Montesano created a COVID-inspired chessboard for his 3D Design class. The “COVID-19 Quarantine Essentials” themed chess...
Registration Rates for AMS 2021 3D Printing Summit Increase January 15th
It’s almost February, which means that this year’s Additive Manufacturing Strategies is almost here! The annual 3D printing business summit, co-hosted by 3DPrint.com and market research and consulting firm SmarTech...
3D Systems Software Sale Doubles DDD Stock Price
On January 7, 2021, 3D Systems (NYSE:DDD) announced the sale of its “non-core software businesses,” sending the stock soaring to over twice its previous value. The company sold its Cimatron and...
Markforged Dispatches 3D Printers to Michigan’s Project DIAMOnD Project
The supply shortage that resulted from the COVID-19 pandemic has seen interesting developments occur in the world of manufacturing. Businesses are moving more quickly to digital production technologies in order...
View our broad assortment of in house and third party products.