BeeVeryCreative Launches “3D Print World Challenge,” Giving Away Three BEETHEFIRST 3D Printers

Share this Article

It seems as though this is a popular time of the year for companies within the 3D printing space, to launch contests, giving away all sorts of awesome prizes. If you are a 3D designer, than the last few weeks have given you an bee-2opportunity to win anything from 3D printers, to gift cards, to 3D printed objects. Yesterday we announced CGTrader’s Easter 3D Printing Challenge, and today we are happy to announced yet another 3D printing challenge.

Yesterday BeeVeryCreative, the first Portuguese 3D printer manufacturer, announced the launch of their “3D Print World Challenge,” in which they will offer six great prizes, including three BeeTheFirst 3D printers, with 8 spools of printer filament each, and three 3D printed trophies.

The contest will run for two months, until June 17th at 11:59 pm (GMT), and is sponsored by 3DPrintShow, Modalisboa, and 3DArtistOnline. Representatives from all three sponsors, along with BeeTheFirst will judge the 3D models based on creativity, awesomeness, and their ability to be 3D printed on the BEETHEFIRST printer. Entrants must design their own 3D printable model of an object in STL format, and it must fall in any of the following categories:

  • Architecture
  • Design (fashion, jewelry, decoration, art)
  • Utilities (gadgets, household and office devices, games)

bee-1

The three printers will be awarded to the entries chosen by the judging panel, while the 3D printed trophies will be awarded to the top entries based on voting that will take place on BeeVeryCreative’s Facebook page. The BEETHEFIRST 3D printer retails for approximately $2235, and has the following specifications:

  • 3D Printing technology: FFF
  • Print Build envelope: 190mm x 135mm x 125mm
  • Print Resolution: High – 100 microns / low – 300 microns
  • Filament diameter: 1.75 mm
  • Print bed: polycarbonate
  • Software: BEESOFT
  • Weight: 10 kg
  • Power supply: 200-230 VAC 2.0A 50-60 Hz
  • Printer size: 40 x 40 x 14 cm

For more details check out the official “3D Print World Challenge” page. If you decide to enter this contest, feel free to post your designs at the 3DPrintBoard Gallery as well.

Share this Article


Recent News

3D Systems Sells Medical Simulation Business for $305M

3D Printed Microneedles Make for Less Painful Continuous Glucose Monitoring



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Engineer Spent Over 900 Hours Designing and 3D Printing Miniature Roller Coaster

If it ever comes up in conversation, I will freely admit that I am a total roller coaster junkie. I love them—the higher and crazier, the better. Give me inversions,...

Featured

Direct Image Sintering: Visitech Introduces New DLP-PBF 3D Printing Tech

In fall 2020, Visitech quietly made news with the release of a scrolling DLP projector capable of sintering plastic powder, potentially opening up new levels of throughput and reduced cost...

Readily3D Bioprinting Pancreas to Help EU-Funded Program Develop Diabetes Treatment

As the World Health Organization reports, the prevalence of diabetes has been rising over the last few decades, and there are currently around 422 million people around the world who...

Sponsored

ROKIT Healthcare’s bioprinting-based diabetic foot treatment kit registered as a U.S. FDA medical device

ROKIT Healthcare has completed registration of its Dr. INVIVO-based diabetic foot treatment with the U.S. FDA and has successfully completed clinical studies in the U.S. Since 2019, the company has...


Shop

View our broad assortment of in house and third party products.