3D Printed e-NABLE Hands Help a Robot Play the Bagpipes

IMTS

Share this Article

Bagpipe player Scotland.

[Image: Robert Harding]

I can’t think of an instrument that commands such polarized reactions as bagpipes do – people seem to either love them with misty-eyed nostalgia or hate them like fingernails on a chalkboard. My own feelings about them are mixed, as they tend to remind me of either weddings or funerals – my family is heavily Celtic on both sides, so pipes have marked many occasions of both great happiness and sadness over the years.

Bagpipes aren’t easy to play. I have a dim memory of trying to play them myself once when I was a very young child, when a relative who plays them let me try them out. I couldn’t get them to make a sound, and quickly wrote off that career idea. But even adults with pipe dreams don’t start out playing the full instrument. When a piper begins learning how to play the bagpipes, they typically start with what’s called a practice chanter, which is a single pipe that allows the novice to learn the technique before adding in the additional complications of the bag and drones. It’s also much quieter than a full set of bagpipes, mercifully, because even the most hardcore fans of the instrument will agree that badly played pipes are an agony to listen to.

f4b471iixla731m-mediumInventor John Dingley, aka XenonJohn, decided to automate the playing of bagpipes by creating an actual robot piper named, amusingly, Ardu McDuino. The device, at this point, is basically a giant pair of 3D printed hands that play a practice chanter, and you can make one yourself thanks to Dingley’s Instructable, if you decide that an android wailing “Scotland the Brave” is exactly what has been missing in your life.

Ardu McDuino is powered by an Arduino Mega 2560, and if its hands look familiar, it’s because Dingley used e-NABLE’s well-known Raptor Reloaded prosthetic hand design. We’ve seen this design customized and printed to give a young boy the ability to play basketball, as well as to help hundreds of others in need, but I will confidently bet that this is the first time the Raptor Reloaded – or any of e-NABLE’s designs – has been used for a bagpipe-playing robot.

“The finger tips are lifted off the holes of a bagpipe chanter with 12V DC solenoids,” Dingley explains. “The solenoids are controlled by the Arduino board via opto-isolated MOSFETS which can be bought on low cost boards fully assembled in groups of four.”

Dingley wrote a code for the robot based on piping instructions from the Teach Yourself Bagpipes website. While he admits that it may be easier to turn the chanter on its side and arrange the solenoids so that they press directly onto the holes, moving fingers just look cooler, in his opinion – and he eventually wants to add arms and a head.

f0h9tx2ixla735g-medium

Dingley provides detailed instructions in 33 steps about how to 3D print and assemble the hands – which are actually just seven fingers and a thumb, custom fit to each hole on the chanter – and the electronic components. He also includes Arduino sketches he created to have the robot play “Amazing Grace” and “Highland Cathedral” (rather badly in the latter case, he admits).

Ardu McDuino is a work in progress; Dingley states that he intends to keep improving the control software with the goal of eventually creating beautiful music. It’s a pretty inexpensive project to tinker around with, and all STL files are included in the Instructable. Check out the talents of Dingley’s robot piper below:

Discuss in the Robot Bagpipes forum at 3DPB.com.

 

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...