Transforming Dentistry: Australian Researcher Uses BioPrinting to Engineer New Jaw & Gum Cells

Share this Article

menziesUpon hearing of any changes to the dental industry, most of us wince, but we want to know what’s going on. What about toothaches, anxiety-producing procedures, and terrifying bills that immediately erase all hope of that Bahamian vacation? Are those becoming obsolete? Well, this is 3D printing—not wizardry. (Sheesh.) Some pretty amazing things are going on in the dental industry, however, thanks to the new technology—and when it comes to that next complex procedure—you may find help from your own cells, thanks to new discoveries coming out of Australia.

By now, you’ve probably heard of bioprinting. While it may seem that most researchers are heavily embroiled in making everything from kidney tissue to blood vessels with the end result being the ability to 3D print organs and keep them viable, a new procedure in dentistry takes a different tact.

UntitledAccording to Periodontist Professor Saso Ivanovski, from Griffith University’s Menzies Institute, after five years of research, he has developed a way to engineer missing bone and tissue in the gums and jaw by using a patient’s own cells. Many may not realize this unless they’ve had similar procedures, but currently dental surgeons take bone and tissue from parts of the body like the hip and even the skull, says Ivanoski.

“These procedures are often associated with significant pain, nerve damage and postoperative swelling,” he said.

Ivanovski’s method should in concept offer improvement all around, including better affordability. And if his study meets with success, the idea would work as such: patients could have a CT scan taken of the region that is damaged. It would then be sent to a bioprinter, where a new part would be made. This is important in that patients could have all of this done in regional medical centers, avoiding trips into the city to a major hospital. For patients living in remote areas, this could be of great help.

“The cells, the extracellular matrix and other components that make up the bone and gum tissue are all included in the construct and can be manufactured to exactly fit the missing bone and gum for a particular individual,” Professor Ivanovski said.

7288594-3x2-940x627As with many other bioprinting concepts and 3D printed implants, the new cells would be expected to grow successfully into the existing healthy tissue, with the use of personal cells making this much more likely to work.

“At the end of the whole process, you wouldn’t be able to identify what is old bone and new,” Professor Ivanovski said.

While this obviously follows the basics of bioprinting happening in many other labs as well, it offers an immediate solution to an immediate need—and would be the first type of such technology in Australia. Due to its potential in the dental industry, this is to be a three-year study and has been granted $650,000 from the National Health and Medical Research Council.

Researchers hope to begin pre-clinical trials for the bioprinting dental procedures during the next year.

“By the end of the year we want to start implanting some of the constructs in some of the more straightforward processes,” Professor Ivanovski said.

Are you surprised to hear about bioprinting in dentistry? Let’s discuss in the 3D Printing & Dentistry forum over at 3DPB.com.

Facebook Comments

Share this Article


Related Articles

Australian Man Receives 3D Printed Titanium Replacement for Sternum

3D Printing News Briefs: April 3, 2019



Categories

3D Design

3D Printed Architecture

3D Printed Art

3D printed chicken


You May Also Like

How do 3D Printed Dentures Stack up when Compared to Milled and Injection Molded Dentures?

In a new study, Korean medical researchers have been looking into the differences in quality and accuracy of several different modern ways to make dentures, with a focus on whether...

Volvo’s Conservation Project: 3D Printed Tiles for a Living Seawall at Sydney Harbour

Oysters, seaweed, fish, algae and many more organisms have a new home at North Sydney Harbour. At one of the world’s largest Living Seawalls in Bradfield Park, an ocean conservation...

Titomic Licenses Two CSIRO Patents for 3D Printing Titanium Piping, Signs Acquisition Agreement with FTT

Renowned for its metal Kinetic Fusion (TKF) technology, Australian 3D printing company Titomic recently signed an MoU with China’s largest manufacturer and global exporter of titanium powder in order to secure a high quality...

GE Additive Signs MoU with University of Sydney to Drive Metal 3D Printing Adoption in Australia

This week, GE Additive announced that it has signed a major Memorandum of Understanding (MoU) with the University of Sydney, which includes a master research agreement. Per the agreement, GE Additive will...


Training


Shop

View our broad assortment of in house and third party products.

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!