Kanèsis Looks to Bring Hemp Filament to Market for 3D Printing Hemp Drones & Much More

IMTS

Share this Article

hemp4Cannabis has been in the news quite a bit lately, mostly for issues related to marijuana. Whether it has been the use of marijuana for medical purposes or for recreational use, there has been much political debate lately over whether or not it should be legalized. No matter what side of the argument you stand on, it’s pretty safe to say that when it comes to hemp use, the debate is not nearly as two-sided.

Hemp is another variety of cannabis, containing negligible levels of the psychoactive drug compounds found in marijuana. Instead, it is harvested mostly for its oil, fiber, and seeds, and is commonly refined into foods, waxes, resins, cloth, paper, fuel, and mulch. As opposed to many inorganic, non-renewable resources that we as humans tend to waste, hemp is a completely natural and renewable resource which many people have been encouraging an increased use and production of.

For two Italian men, named Giovanni Milazzo (23) and Antonio Caruso (27), they are looking to bring this naturally grown product into the 3D printing space in quite an interesting way: via 3D printer filament. That’s right, they are looking to sell hemp as a feedstock for 3D printing products through their company, Kanèsis.

3D printed out of Kanesis Hemp Filament

3D printed out of Kanèsis Hemp Filament

“The idea of Kanesis was first conceived by Giovanni one year ago,” Antonio Caruso tells 3DPrint.com. “Day by day, the project has grown significantly until in January I met Giovanni and we decided to continue the project together. We both could have our own job, but we firmly believe in this project and for this reason we are investing, literally everything we have, in Kanesis.”

Milazzo, who is a hurdles jumper for the Italian National circuit, graduating in Industrial Engineering, and Caruso, who was a financial analyst for Citigroup, realized that the 3D printing market as well as the the 3D printing materials space were growing at a rapid rate. They decided it was time to grab a piece of the pie, in a means which would benefit our environment and society as a whole. So what exactly are the benefits to 3D printing with hemp?hemp6

“The basic hemp filament has considerable technical advantages,” Caruso tells us. “The objects molded with hemp plastic do not seem like simple plastic objects, and what is even more extraordinary, they do not seem objects printed in 3D, since the difference between each layer is not relevant. It is lighter than conventional petrochemical plastics and therefore it is particularly suitable for building technological objects like small drones for example.”

Are 3D printed hemp drones on the horizon? They very well may be, if Caruso and Milazzo have their way.

The filament they have created is made up of 100% vegetation, formed by the residues of two plants that together with a thermoplastic resin make the material suitable for extrusion from a 3D printer’s hotend. It prints at a temperature very close to that of PLA filament, just slightly higher at 210 degrees Celsius.

hemp5As for what 3D printed end-products look like, you can see some examples in the photo provided, but Caruso tells us that it is extraordinarily light in weight and provides an outstanding finish, “completely natural to the touch.”

The plan is to officially unveil this new material at a conference and expo in Milan on August 8-12, 2015. They then plan to launch a crowdfunding campaign to raise funds for production sometime this fall. The two men hope that they will be able to bring the filament to market sometime in the beginning of 2016. Pricing has not yet been determined but we are told that it will be priced within the “elite range of specialty filaments.”

“As it has a considerably lower density than other materials used to make filament, it will take more volume; a [spool] of 0.500 Kg will be equivalent to a ‘normal’ filament spool of 0.750Kg,” Caruso tells us.

hemp1

The upcoming crowdfunding campaign will also aim at developing other hemp-based industrial products such as bio-fuels, bio-polymers, and other bio-composites that are already in advanced stages of development.

“Kanèsis is not a product, but it is the name of an ambitious project that puts the most receptive and creative Sicilian minds together,” says Caruso. “Our purpose is to give a future to our land not based on oil/petrol. We can develop all the products we need from the fields, and this is our aim. Developing bio-fuels, paper, bio-bricks, bio-composites from earth, thus generating thousands of jobs in a country where 70% of the land is currently abandoned: this will be the crux of our crowdfounding campaign!”

What do you think about the potential that Kanèsis could provide? Would you be tempted to purchase 3D printer filament made of hemp? Discuss in the Kanèsis Hemp 3D Printer Filament forum thread on 3DPB.com.  Check out the video below.

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Ricoh to Open 3D Printing Center of Excellence at North Carolina State University

Japanese 2D-to-3D printing firm Ricoh is further extending its activities in the additive manufacturing (AM) sector, this time partnering with North Carolina State University to establish a Center of Excellence....