3D Printing Will Help Bring Us An Actual Hoverboard in 2015 – Interview With Arx Pax CEO Greg Henderson

IMTS

Share this Article

h7We are one month into the year 2015, and despite predictions made by writers Bob Gale and Robert Zemeckis in their 1985 Back to the Future we have yet to lay eyes on an actual working hoverboard. If you recall, Michael J. Fox’s character, Marty McFly’s preferred get-away vehicle in the film was a skateboard-like contraption which floated on a thin layer of air rather than relying on wheels for its movement.

Greg Henderson Arx Pax CEO, Co-founder

Greg Henderson Arx Pax CEO, Co-founder

Even today such a vehicle seems nearly impossible, but after speaking with a man named Greg Henderson, CEO and Co-Founder of Arx Pax, parent company of Hendo Hoverboards, my opinion has drastically changed. Not only is Henderson constructing an actual hoverboard, but he and his team want to begin shipping the very first unit this year. And despite the skeptics who are out there, 3D printing is playing a major role in the speed at which Arx Pax is able to move forward with their plans.

A major Kickstarter success at the end of last year, raking in over $510,000, Arx Pax’s hover engines which will power their Hendo Hoverboard are more than just amazing. The company is making tremendous progress leading up to the expected October 21, 2015 launch date (Yes this is the date in which Marty McFly arrives in the Future in Back to the Future). This progress, as Henderson tells us, is sparked primarily by their use of 3D printing, a technology that he seems to be as excited about as we are here at 3DPrint.com.

Speaking of a specific key component used in the first prototype of their hover engine Henderson told us the following:

“The first one I designed it took a week to get it manufactured at a machine shop out of aluminum. It cost $500, and we had to bring it back and put it together. Today we print new components that essentially replace that component for about $1.50 in filament and 60-90 minutes of print time. “

h2

I asked him where his company would be if he did not have access to 3D printing.

“I think it’s a very safe bet to say that we wouldn’t be where we are,” explained Henderson to 3DPrint.com. “We would still be hovering things, but it would be in the first generation not our 20th. We are much further along than we would have been. We have saved a great deal of money by using 3D printing, absolutely!”

The company’s first printer was a 3D Systems-made CubeX. From there they purchased a MakerBot Replicator, which they have put hundreds upon hundreds of hours of print time on already. Recently they acquired a printer from Ultimaker, which Henderson feels has really been a benefit to the company because of its high resolutions, and ability to provide near-exact dimensions when needed on the fly.

“It would be great to move at some point to a professional or production 3D printer that has more capabilities than PLA or ABS does,” explained Henderson. ” But, man this is such a phenomenal technology because we are able to rapidly iterate where it might [normally] take weeks of turnh5around time to design, test and build some component. We can even at a sub-scale test a component’s mechanical connections, and all sorts of other things which would be prohibitedly expensive, but instead we are able to knock these things out, test and iterate within a day.”

The company is primarily using PLA in their printers, and Henderson informs us that he hasn’t seen any real benefit to ABS beside finish appearance, which they are not concerned with at this time.

During the company’s prototyping of the hover engine’s components they experimented with outsourcing parts to other companies as well, but in the end they found that 3D printing the parts in-house was the way to go. It has enabled them to think about problems in new ways, which according to Henderson is particularly exciting when creating a new industry.

As for whether we will eventually see end use components within the actual hoverboard later this year, that is doubtful. However, Henderson tells us, there are certain one-off pieces that they are selling right now, or would consider selling, which are entirely appropriate to 3D print and are individually customizable.h3

If you were one of the backers of the Hendo Hoverbord, then Henderson has some good news that you will like to hear. As of now, the company is on track to meet their deadlines, and several additional prototypes have been constructed since the end of their Kickstarter campaign. These prototypes feature different engine characteristics and configurations, almost all of which include 3D printed components. He wants his backers to be pleasantly surprised and ultimately provide them with more than what they are expecting.

As for Henderson’s personal opinion on 3D printing technology and where it’s headed, he closed the interview with the following statement:

“I would say if you are trying to solve a problem and you can conceptualize this in a physical way, 3D printing offers you a tool, that if you are not taking advantage of it you should certainly consider it. Rapid iteration and being able to redefine problems to make sure you are asking the right questions, is something that in previous human history has been prohibitive; you make a decision, you make something and you live with it. We don’t have to do that any more.”

I will be waiting eagerly to see just what Henderson and his team bring forth by year’s end. How about you? Disucuss in the Hendo Hoverboard forum thread on 3DPB.com.  Check out the video below of the Hendo Hoverboard being tested out by none other than Tony Hawk.

Share this Article


Recent News

3D Printing Financials: Velo3D Struggles in Harrowing 2023 Earnings Report

Time Travelers’ Relics: 5 Spectacular 3D Printed Artifacts that Bring History to Life



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Webinar and Event Roundup: March 17, 2024

It’s another busy week of webinars and events, including SALMED 2024 and AM Forum in Berlin. Stratasys continues its in-person training and is offering two webinars, ASTM is holding a...

HP Releases New Arkema Sustainable 3D Printing Polymer Ahead of AMUG 2024

Ahead of the Additive Manufacturing Users Group (AMUG) Conference in Chicago next week (March 10-14), HP Inc. (NYSE: HPQ) has announced a new sustainable polymer offering, PA 12 S, for...

3D Printing Financials: Materialise Reports Growth in 2023 with Medical Segment Success

Closing out 2023, Materialise (Nasdaq: MTLS) unveiled a strong financial performance for its fourth quarter. The Belgium-based company reported a revenue increase of 4.1% year-over-year, and despite facing net losses,...

3D Printing Webinar and Event Roundup: February 25, 2024

It’s another busy week of webinars and events in the AM industry, including Silicone Expo Europe in Amsterdam, an open house for Massivit in North America, and the AM for...