Ottermatics’ 3D Printed Prototype Seeks to Breathe Life into Wine With the Perfect Aerator

IMTS

Share this Article

3D printed products have made some amazing headway in critical applications. We’ve seen fantastic, futuristic uses in the medical and aerospace fields, to name just a couple. And of course we’ve seen some pretty silly uses, too, like little toys and desk doodads that may not really be necessary, but sure are fun. Somewhere between these two ends of the spectrum are the simply functional, and that’s where a wonderful new product for wine drinkers comes in.

vinturi

Traditional vinturi type wine aerator

I’m not going to pretend wine is a critical need, but let’s face it; at the end of a long day, nothing tops off an evening quite like a nice glass of wine. I know I’m not patient enough to decant every bottle I open, and looking at the sheer number of wine aerators on the market, I know I’m not alone.

Wine aerators are simple devices through which wine can be poured, acting as almost an instantaneous decanting, allowing the wine to “breathe” and open some of the flavors. Most aerators available now are of the vinturi type: the wine enthusiast simply pours wine from the bottle through the aerator, and into the glass to have air mixed into their red wine.

While most people accept vinturi aerators as the standard, two men thought they could create a better way. Florida-based Ottermatics is a design firm founded by Aleksey Matyushottermaticsev (Principal Solutions Tinkerer) and Kevin Russell (Chief Overanalyzer), who set out on a mission to create a superior aerator.

Matyushev and Russell have unique backgrounds making them particularly well-suited to think about their approach from a different angle. Their experience in aircraft aerodynamics and hydrodynamics inspired them to use the concept of a turbulating effect for their aerator. Similar to turbulence on an aircraft, turbulating the wine slows and tosses — rather than accelerating — the wine sent through the aerator.

IMG_1683

While seated at the drawing table, they also thought they could address some other problems specific to handheld vinturi aerators, such as: holding an aerator above a glass can lead to spillage, some aerator designs leak, and using a two-handed pour method can be simply inconvenient. To these ends, the pair thought to include their aerator design into the pouring process itself, eliminating the middle man mentality of holding a completely separate piece of equipment.

prototype1

The first prototype

Matyushev and Russell knew what they wanted to do — but it was figuring out how to go about it that brought their ideas to our attention. Matyushev and Russell had ideas on their turbulating theory, but weren’t sure about the best array of triangles in the device to achieve the desired effect. Traditional means, like making a computational fluid dynamics (CFD) model and doing fluid dynamics analyses through several iterations, would be expensive and prevented them from tasting the results. They needed rapid prototyping, and saw their answer in 3D printing.

By using additive manufacturing in their prototyping process, the Ottermatics team could create physical, workable aerators and actually test them with real wine. Taste, after all, is the key to the whole process here. Fortunately, Ottermatics had a Solidoodle 4 3D printer already, and set out to work.

Because their CAD designs are relatively simple, not requiring high resolution or precision, they could create an iteration of the wine aerator in just 45 minutes. In under an hour, the team could go from an idea to testing and sipping the aerated wine. I don’t think I could get to the store and back with an aerator ready to go in that time.

prototype2-300x268

The second prototype

Of course, the first prototype wasn’t exactly right. Fortunately though, they could make about six iterations in a single day, and by day two of their task, the Ottermatics team had found their winner. The same process would have taken about two weeks — and maybe $700 in tooling costs — to get to the final design test. Using a CFD model, each design would have required around five hours of analysis before creating each iteration. Using CAD, the process took closer to 10 minutes to rearrange the internal triangle array before the next prototype was ready to start printing.

The ninth iteration came out so well, and their wine tasted so good using it, that they took it to a wine bar to test it out in the real world. Pitted against a leading acrylic aerator in a blind taste test, the 3D printed prototype dominated. Every taster selected the wine aerated using the 3D printed piece over the market leading piece.

I think I know what I’ll be on the lookout for next time I’m in the market for an aerator. This innovative prototype’s concept rendering is a far sleeker design than the red 3D printed prototype, and I hope the Ottermatics team keeps at this project!

vine3.13-300x225

Ottermatics wine aerator concept rendering

What do you think? Do you use wine aerators? Would you use one designed this way? Let us know your thoughts in the 3D Printed Wine Aerator forum thread over at 3DPB.com.

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...