We have seen a number of surgeries in the last few months involving 3d printed patches to the human skull, however this procedure blows those all away. Surgeons at Utrecht University’s UMC in the Netherlands replaced the entire top of a 22 year old woman’s skull with a 3d printed customized implant made from plastic.
The woman suffered from a rare disorder in which her skull was gradually becoming thicker and thicker. The normal thickness of a human skull is approximately 1.5cm, but the patient’s skull was already close to 5cm in thickness, and growing. Continued growth would have eventually led to her death as the skull was compressing her brain, causing serious damage.
The 23 hour operation was performed by neurologist Bon Verweij, surgeon Marvick Muradin, and their highly skilled team. Normally surgeons would create an implant with a concrete like substance, which are heavier, and imperfect, as they are hand made. The plastic implant, which was created specialist Australian firm, had been customized for the patient.
“Implants used to be made by hand in the operating theatre using a sort of cement which was far from ideal,’ Verweij said. “Using 3D printing we can make one to the exact size. This not only has great cosmetic advantages, but patients’ brain function often recovers better than using the old method.”
The operation, which took place back in December, and was an overwhelming success, with the patient making a full recovery, and already returning to work, symptom free. Discuss this procedure at 3D Print Board. Also check out the video below for further details on this implant.
Subscribe to Our Email Newsletter
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
You May Also Like
Precision at the Microscale: UK Researchers Advance Medical Devices with BMF’s 3D Printing Tech
University of Nottingham researchers are using Boston Micro Fabrication‘s (BMF) 3D printing technology to develop medical devices that improve compatibility with human tissue. Funded by a UK grant, this project...
3D Printing Webinar and Event Roundup: April 21, 2024
It’s another busy week of webinars and events, starting with Hannover Messe in Germany and continuing with Metalcasting Congress, Chinaplas, TechBlick’s Innovation Festival, and more. Stratasys continues its advanced training...
3D Printing Webinar and Event Roundup: March 17, 2024
It’s another busy week of webinars and events, including SALMED 2024 and AM Forum in Berlin. Stratasys continues its in-person training and is offering two webinars, ASTM is holding a...
3D Printed Micro Antenna is 15% Smaller and 6X Lighter
Horizon Microtechnologies has achieved success in creating a high-frequency D-Band horn antenna through micro 3D printing. However, this achievement did not rely solely on 3D printing; it involved a combination...