Discovering the Four-Laser SLM 500 HL 3D Printer with SLM Solutions’ Director of Engineering

IMTS

Share this Article

SLM SOLUTIONS SLM 500 HL05There are not many powder bed fusion machines on the market that already offer multiple laser build capabilities. SLM Solutions’ SLM 500 HL builds parts using four 400-watt lasers working at the same time. The machine was on display at Inside 3D Printing Düsseldorf  in February, and we did not miss the opportunity to speak with the company’s Director of Engineering and Product Management, Dr. Jan Wilkes, about how this wonder of advanced industrial technology does what it does.

Wilkes is the person in charge of all engineering groups involved in designing the machines and making sure they function correctly. These include the chemical, electric, hardware engineering, software development, process and material development teams, as well as a technology development group and product management group.

“The advantages of multiple lasers are evident in terms of speed in the build rate and productivity,” he immediately clarifies. “Having four lasers means you can reach productivity that is more than 3 times as fast as single laser machines, this is a very significant increment.”

SLM SOLUTIONS SLM 500 HL01Exactly how much faster four lasers can work depends very much on part geometry, on whether it is a massive part or a thin wall part, and on the proportional scanning time. Furthermore, sometimes a part is not shaped in a way that it can be made with full uptime of all four lasers. In this case one of the lasers may pause and that would reduce the combined build rate. Nevertheless, with all parameters being optimal, the rate can get very close to a fourfold increment.

Wilkes is now working on powering up the lasers, which, in a way, is the same idea of using a bigger nozzle on filament-based machines. The machine currently works with four 400-watt energy sources, and the engineering team is studying an upgrade to four 700-watt lasers.

“Increasing the laser power is tricky and is not sufficient for incrementing speed,” Wilkes explains. “A more powerful laser increases the size of the meltpool and that generally means that the resolution and surface quality becomes poorer. You cannot just increase the laser power to 2, 3 or 5 KW without losing part quality. We found that we can manage 700 Watt and achieve approximately the same quality as 400 Watt lasers. Increased laser power is particularly beneficial to aluminum alloys.”

SLM SOLUTIONS SLM 500 HL09

For example, says Wilkes, with a typical aluminum alloy you can increase scanning speed up to 100% compared to a 350-watt laser. However, he warns, you cannot push significantly beyond that: you cannot have 2 KW laser and still achieve the same quality. More lasers – even beyond four beams – is an alternative approach that SLM Solutions is going to look at in the future.

“It is not a principal difference in terms of algorithms when you use 4 or 8 lasers,” says Wilkes. “One thing that is particularly tricky in the multiple laser setup is the alignment of the lasers with each other. That’s because, if you are building a large part with all lasers in parallel, they have to be aligned with extreme precision.”

SLM SOLUTIONS SLM 500 HL02The SLM 500 was the first double laser machine and is currently the only quadruple laser SLM 3D printer on the market; however, the recent improvements on the new SLM 500 HL have been focusing on other aspects that can speed up the production cycle – for example, by managing cooling more efficiently. The machine now features an exchangeable build platform concept. Once a build is complete, the entire build plate is ejected from the machine and the parts can cool down while the machine can begin working on a whole new set of parts. The plate moves right out of the machine and can subsequently be positioned inside the powder cleaning station.

As anticipated, the SLM 500 HL is now capable of 3D printing some of its own parts. Wilkes showed me one that is visible, and of course it looks just like any other part. He also said that some of the complex parts on the inside are built by SLM, which, of course, makes perfect sense. Machines building themselves and engineers optimizing every aspect of the production cycle: that is why the speed of metal 3D printing is increasing exponentially, doubling approximately every two years. Today we are talking about going from two to four lasers; one day we may be considering going from 128 to 256. SLM Solutions will probably have a solution for that too. Discuss your thoughts on this new technology in the SLM 500 HL 3D Printer forum over at 3DPB.com.

Share this Article


Recent News

Will There Be a Desktop Manufacturing Revolution outside of 3D Printing?

Know Your Würth: CEO AJ Strandquist on How Würth Additive Can Change 3D Printing



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

Pressing Refresh: What CEO Brad Kreger and Velo3D Have Learned About Running a 3D Printing Company

To whatever extent a business is successful thanks to specialization, businesses will nonetheless always be holistic entities. A company isn’t a bunch of compartments that all happen to share the...

Würth Additive Launches Digital Inventory Services Platform Driven by 3D Printing

Last week, at the Additive Manufacturing Users’ Group (AMUG) Conference in Chicago (March 10-14), Würth Additive Group (WAG) launched its new inventory management platform, Digital Inventory Services (DIS). WAG is...

Featured

Hypersonic Heats Up: CEO Joe Laurienti on the Success of Ursa Major’s 3D Printed Engine

“It’s only been about 24 hours now, so I’m still digesting it,” Joe Laurienti said. But even via Zoom, it was easy to notice that the CEO was satisfied. The...

Featured

3D Printing’s Next Generation of Leadership: A Conversation with Additive Minds’ Dr. Gregory Hayes

It’s easy to forget sometimes that social media isn’t reality. So, at the end of 2023, when a burst of doom and gloom started to spread across the Western world’s...