Baby Kieran Thrives with Help from 3D Printed Heart Model

IMTS

Share this Article

The day of an ultrasound can be one of the most exciting pre-birth connections a parent makes with his/her child. Even though the pictures don’t hold a candle to those taken outside of the womb, there is something amazing about giving form to the life growing in the womb, and they are the first glimpses of the tiny being who will change your world forever. In some cases, however, the information provided by the ultrasound goes beyond the simple introduction of baby to parent and reveals important information about problems that need medical attention. This was the case with an ultrasound performed on expectant mother Caitlin Veitz when she was 20 weeks pregnant.

A-virtual-model-of-Kieran-in-MimicsThe ultrasound she received that day would fill the parents with fear and anxiety for their child as it revealed that their baby’s heart was growing outside of the chest wall, a condition that is so rare, it was difficult for the doctors to offer reasonable assurances that they could address the problem. Luckily for her and baby-to-be Kieran, Veitz had access to some of the most highly skilled doctors in the world through the Mayo Clinic. The medical team attending to this special case needed to do everything possible to prepare what Kieran would need, as her very survival was at stake.

An-ultrasound-shows-Kieran-heart-outside-her-chestAn early step in the preparation consisted of the creation of a 3D printed model of Kieran’s anatomy developed from ultrasound data using the Materialise Mimics Innovation Suite. Dr. Jan Matsumoto, radiologist and co-director of the Mayo Clinic’s 3D Anatomic Modeling Lab, then color coded and segmented all of Kieran’s major organs and determined the location of her body in relationship to the placenta, uterus, heart, and liver. It was determined, after working with a life size 3D printed model, that in fact Kieran’s liver and intestines were developing on the outside of her body as well as her heart.

Caitlin-with-baby-KieranThe multiple surgeries that would be necessary to remedy these anomalies presented grave danger of over-stressing the little girl, and so a decision was made to focus first on safely moving the heart back into her chest cavity. Using the model, the medical team prepared for a post-partum operation to occur after a C-section.

Even this planning wasn’t sufficient as Veitz’s blood pressure rose dramatically and the baby’s vital signs weakened several days before the planned C-section, and an emergency surgery had to be performed in order to deliver the baby. The Mayo Clinic is equipped to handle just such alarming developments and within 90 minutes had assembled a team of 60 doctors and nurses who would be involved with the entire process from birth to heart surgery. The delivery itself took place in the cardiac surgery operating room, not a typical location, but one that was chosen because of the immediate surgical needs the baby would bring with her.

Dr.-Matsumoto-uses-the-Mimics-Innovation-SuiteDespite the early arrival of Kieran, the detailed preparation conducted by the medical team in relation to her particular condition meant that despite the change in date, they were well versed in the intricacies of the procedure and her surgery was a categorical success. After four and a half months of treatment and observation in the pediatric intensive care unit, it was finally time for Kieran’s parents to bring her home. Currently six months old, Kieran is on par with growth expectations for babies her age, and what could have been a tragedy is a story of strength, technology, and a bright future for a beautiful little girl.

 

Share this Article


Recent News

World’s Largest Polymer 3D Printer Unveiled by UMaine: Houses, Tools, Boats to Come

Changing the Landscape: 1Print Co-Founder Adam Friedman on His Unique Approach to 3D Printed Construction



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

Featured

US Army Corps of Engineers Taps Lincoln Electric & Eaton for Largest 3D Printed US Civil Works Part

The Soo Locks sit on the US-Canadian border, enabling maritime travel between Lake Superior and Lake Huron, from which ships can reach the rest of the Great Lakes. Crafts carrying...

Construction 3D Printing CEO Reflects on Being Female in Construction

Natalie Wadley, CEO of ChangeMaker3D, could hear the words of her daughter sitting next to her resounding in her head. “Mum, MUM, you’ve won!” Wadley had just won the prestigious...

Featured

Blue Laser-powered M600 3D Printer Launched by Meltio

Founded in 2019 as a joint venture between Additec and Sicnova, metal 3D printer OEM Meltio develops and manufactures high-performance and easy-to-use metal 3D printing solutions that use its patented wire-laser metal...

3D Printed Storage Tanks Cut Material Costs by 25%

In a previous article, “Concrete Dreams: Let’s Print Money, Not Houses,” we discussed how the spotlight on 3D printing homes might be misplaced. Bollards, pedestrian bridges, and concrete tanks could...