e-NABLE Looks Back on a Successful Two Years of 3D Printed Prosthetics, Introduces Several New Designs

IMTS

Share this Article

isabellaarm1Since its beginnings in 2013, e-NABLE has grown from a small community of about 100 makers into a giant network of around 7,000. Roughly 2,000 prosthetic devices have been created, benefiting people in approximately 45 countries. As the organization wraps up another year, e-NABLE volunteer and blogger Jen Owen spoke with leading designer Peter Binkley about some of the most successful designs of the past two years. Binkley has been a prolific designer, working on such designs as the Raptor Hand and the Ody Hand, and he reflected on how the community’s work has evolved throughout 2014 and 2015.

“In 2014, designers really refined wrist powered designs but there grew an awareness that 3D printed assistive devices could and should be used for those with transradial and transhumeral upper limb differences,” Binkley said. “The RIT arm championed by Jon Schull and the RIT lab was a bold step into elbow-powered devices. In 2015, we saw some very nice improvements in wrist-powered devices, like the Phoenix hand, but also a lot of exploration into transradial devices, like the Flexy Arm, the Unlimbited Arm and some impressive improvements to the RIT arm design. We are also seeing some very exciting developments in low-cost myoelectric devices.”

ospreyhand-768x515

As 2015 ends, e-NABLE has added several new designs to its website. The Osprey Hand, designed by Binkley, is a wrist-powered device based on several components of the Raptor Hand, but with alterations that include thicker cables and a universal-fit bracer. It’s also the first prosthetic hand designed specifically to use a Bowden push-pull mechanism.

Phoenixhand-600x800In May of this year, Jason Bryant’s Orthotic Rubber Band Hand, which combined elements from the Raptor Reloaded and Falcon V1 designs, was a work in progress. While it’s still an experimental design in progress, it has been rebranded the Phoenix Hand and has gathered a large group of community members working diligently to perfect it.

The Unlimbited Arm was created by designers Stephen Davies and Drew Murray from Team Unlimbited and inspired by work by Christian Silva and Po Paraguay. The elbow-driven device, which is still in the beta testing stage, is for individuals with a partial forearm but not enough wrist to power a wrist-driven device. It’s currently compatible with the Phoenix Hand, and developers are working on the design to make it compatible with a larger variety of prosthetic hands.

viola-bow-holderIn addition to prosthetic hands and arms, several new assistive devices are also being introduced. Two designs in particular were created to help musicians who were having trouble holding their instruments.

The Viola Bow Holder Device was created by Frankie Flood, a professor at the University of Wisconsin Milwaukee, for a young girl named Shea Stolenwork, who was born without fingers on her right hand. Flood designed a sort of gauntlet that can be attached to the wrist, with a special holder allowing for the attachment of a viola, violin or cello bow. One of Flood’s students, Caitlyn Driver, created a trumpet holder device for a boy named Karuna, who is also missing all of the fingers on one of his hands. Karuna’s Trumpet Holder is another of the new designs up for download or modification on e-NABLE’s website.

trumpethand-768x510

If e-NABLE continues to grow at the rate it has been for the past two years, there’s no telling what kinds of innovative and advanced designs we may be seeing at this time next year – particularly because the community of designers and volunteers is becoming increasingly more global.

“In 2015, we saw a much larger proportion of designs coming from geographically diverse locations,” said Binkley. “In addition to North America, Britain and Europe, there are several really exciting developments coming from volunteers in South America and Asia. So I’d say in 2015, the design collaboration became much more international.”

Discuss this article in the e-NABLE design forum on 3DPB.com.

newdesigns

Share this Article


Recent News

3D Printing Financials: Velo3D Struggles in Harrowing 2023 Earnings Report

Time Travelers’ Relics: 5 Spectacular 3D Printed Artifacts that Bring History to Life



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Webinar and Event Roundup: March 17, 2024

It’s another busy week of webinars and events, including SALMED 2024 and AM Forum in Berlin. Stratasys continues its in-person training and is offering two webinars, ASTM is holding a...

HP Releases New Arkema Sustainable 3D Printing Polymer Ahead of AMUG 2024

Ahead of the Additive Manufacturing Users Group (AMUG) Conference in Chicago next week (March 10-14), HP Inc. (NYSE: HPQ) has announced a new sustainable polymer offering, PA 12 S, for...

3D Printing Financials: Materialise Reports Growth in 2023 with Medical Segment Success

Closing out 2023, Materialise (Nasdaq: MTLS) unveiled a strong financial performance for its fourth quarter. The Belgium-based company reported a revenue increase of 4.1% year-over-year, and despite facing net losses,...

3D Printing Webinar and Event Roundup: February 25, 2024

It’s another busy week of webinars and events in the AM industry, including Silicone Expo Europe in Amsterdam, an open house for Massivit in North America, and the AM for...